[. . . ] You can repeat the same steps for other devices (Set Top Box, DVD player/recorder or VCR) which you want to operate using the SRU 5130. Example of TV: 1 Turn your TV on manually or use the original remote control. If the key does not light up, check whether the batteries are properly inserted (see `2. If the TV responds as it should to all of the key commands the SRU 5130 is ready for use. [. . . ] sTB for Set Top Box , satellite or cable decoder and digital terrestrial television and DVD for DVD player/ recorder and VCR. Full search setup If your code does not work or if the brand of your device is not mentioned in the code list, you can try setting the remote control with full search setup. Press the mode key of the device you wish to set up the remote control for. Press and hold the Stand-by key of the SRU 5130 until your TV switches off (stand-by). The illustration on page 2 gives an overview of all keys and their functions. Light up when a remote control command is sent to the selected device. Note If the device does not respond at all, or not to all of the key commands, follow the instructions under `2. You can select the device you wish to operate with the TV, STB and DVD keys. If desired, you can program the keys to select a different kind of device. In the following example you will see how to configure the DVD key for a second TV. Then keep keys 1 and 6 on the SRU 5130 pressed simultaneously for three seconds, until the DVD key lights up. Restoring the original functions of your remote control Keep keys 1 and 6 on the SRU 5130 pressed simultaneously for three seconds, until one of the mode keys (TV, STB or DVD) flashes twice and then remains lit. All original functions have now been restored and any extra functions have been deleted. In this chapter you find answers to the most frequently asked questions about your universal remote control. how do I set the remote control for combo devices (TV/VCR , TV/DVD , DVD/VCR , etc)?Some combo devices require you to set up two different source selection keys to control both parts of the combo device. For example, if you have a TV/DVD combo, you might need to set up one code under the TV key to control the TV and a separate code under the DVD key to control the DVD. The device I want to operate does not respond and the mode key (TV, STB or DVD) does not flash when I press a key. The device I want to operate does not respond but the mode key (TV, STB or DVD) does flash when a key is pressed. Point the SRU 5130 at the device and make sure that there are no obstructions between the SRU 5130 and the device. [. . . ] Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. [. . . ]